Mixing Desks for PA
Designed in 1969, the classic BCM10’s class-A design, transformer balanced topology delivered ultimate audio performance throughout the golden era of studio recording. The modern BCM10/2 MkII introduces routing & monitoring options for use in today’s studios, with multiple configurations to allow any artist, producer and engineer to harness the iconic Neve® sound.
General Specification
- Neve® classic sound using Class A topology
- Console sizes: 10,16,24, 32 or 48 channels
- 1073N microphone preamp and EQ module in each channel
- Classic voltage mixing using 1272 balanced mixing topology
- 2x 500-series slots fitted with Neve 2264ALB compressors, patchable or selectable across the Mix Bus
- Direct outputs on every channel selectable pre or post channel insert
- Simple Input to each channel doubles the mix inputs when mixing and also allows monitor and cue mixes
- 4x Auxes, 1x Stereo Cue, 1x Stereo Main Mix Bus
- Stereo and 5.1 monitor with passive 24 position gold plated monitor level control
- 3x Stereo & 1x 5.1 selectable loudspeaker output sets
- Comprehensive Solo system with destructive and safe/isolate modes
- 2x Stereo reverb returns with width, mono and balance controls & 2x mono DI to bus inputs
- Main Mix output insertion selectable pre or post fade with IMR (Insert Mix Return) parallel processing controls
- 25-way D-sub connectivity for easy installation into home or studio environments
Audio Performance
Mic Input (Transformer-balanced) to Insert Send
- Headroom – >+28.5dBu @ 10kohms bridging (<0.5% THD+N)
- Frequency Response – Typically +/- 0.25dB, 20Hz to 20kHz
- Distortion (THD+N) – Typically 0.028% @ 1kHz (measured at +20dBu 10Hz to 80kHz filter)
- Noise (EIN) – <-126.0 dBu (20Hz to 22kHz filter, 60dB gain, input terminated 150Ω R)
Line Input to Mix Output
- Headroom – >+28.5dBu @ 10kohms bridging (<0.5% THD+N)
- Frequency Response – Typically +/- 0.25dB, 20Hz to 20kHz
- Distortion (THD+N) – Typically 0.028% @ 1kHz (measured at +20dBu 10Hz to 80kHz filter)
- Noise (EIN) – <-126.0 dBu (20Hz to 22kHz filter, 60dB gain, input terminated 150Ω R)
- Mix bus Noise – typically -86dBu 20Hz to 20kHz filter
- Output noise – typically -95dBu 20Hz to 20kHz filter
Dimensions
- Height (on stand) to top of speaker shelf – 998mm (39.2 inches)
- Height (on stand) to top of faders – 754mm (29.6 inches)
- Height (without stand) to top of speaker shelf – 455mm (17.9 inches)
- Height (without stand) to top of faders – 210mm (8.2 inches)
- Depth – 1096mm (43.1 inches)
- Width (10 channel console) – 878mm (34.5 inches)
- Width (16 channel console) – 1158mm (45.5 inches)
- Width (16 channel console with producers table) – 1900mm (74.8 inches)
- Width (24 channel console) – 1529mm (60.1 inches)
- Width (24 channel console with producers table) – 2271mm (89.4 inches)
- Width (32 channel console) – 1900mm (74.8 inches)
