CRAAFT AUDIO GmbH

CRAAFT AUDIO GmbH is the roof of the brand NOVA© (NOVACOUSTIC©)

Skaņas sistēma PICCO 450/900 W

760.00 €
Skaņas sistēma PICCO 450/900 W
Skaņas sistēma PICCO 450/900 WSkaņas sistēma PICCO 450/900 W
760.00 €

»1x 300/600 W digit. amp for sub
»2x 75/150 W digit. amp for tops
»7 channel mixer
»Sub: 10” Long stroke bass speaker
»Top: 2x 4” special Alucone speaker
»Sub Dimensions: (WxHxD) 300 x 370 x 390 mm
»Top Dimensions: (WxHxD) 140 x 260 x 130 mm
»Weight: Sub 15,8 kg
»Weight: Top 2,3 kg
3x Mic/Line Input
»1x Line Input (Stereo)
»1x Input Jack 3,5 mm (PC, Phones)
»Tonecontrol low / mid / high
»1x MP3/Bluetooth Channel
»Master Volume
»EFX Volume
»Satellite Level
»Satellite Balance (L/R)
»Sub Level
»PC,Phones Level
»MP3/Bluetooth Level
»16 digital effects
»16 DSP sound program settings
6-fixed programs and 10 free
user program-settings
»Master Out
»EFX send/return
»Footswitch EFX On/Off
»MP3/Bluetooth Player
SD Card/USB reader

DXP 2300 profesionāls jaudas pastiprinātājs

1069.00 €
akustika, jauda, pastiprinātāji, DXP series
1069.00 €

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.000 W at 2 HU) ► Independent clip limiters ► Class-H technology (all models) ► XLR input connectors (with XLR-link connectors) ► SPEAKON© output connectors (Neutrik©) ► Comprehensive package of safety circuits ► Front mounted gain controls for easy access Description The DXP-series amplifiers are two-channel amplifiers at a compact size of 2 HU (rack spaces). The DXP-series amplifiers offer clean, dynamic sound quality and reliability that pros depend on. The front panel shows two gain controls for easy access and the main switch. The LED display informs about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) can be switched in following modes: 1.4 volts, 32 dB and 26 dB. Two SPEAKON© outputs are mounted at the rear side. The SPEAKON© connector of output 1 (left) is connected at all four poles. This connector offers the output signal of channel 2 (right) at the pins 2 (+/-). This enables a four-pole connection of two-way speaker systems with one speaker cable only. The DXP-series amplifiers can be switched into three different operation modes: stereo, parallel and bridge mode. The independent limiters can be switched on or off. All models are equipped with a switch-on delay to protect the connected speakers. Technical data Model:DXP2300 Article number:# 22171 8 ohms per channel (watt):800 4 ohms per channel (watt):1.200 2 ohms per channel (watt):1.500 8 ohms bridged (watt):2.400 4 ohms bridged (watt):3.100 THD at 1 kHz and 1 dB below clipping:0.05 % THD at 100 kHz and 1 dB below clipping:0.07 % THD at 10 kHz and 1 dB below clipping:0.1 % Damping factor:1.000 Channel separation at 10 kHz:54 dB Output impedance:minimum 2 ohms load Slew rate:55 V / µs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:70 dB Gain controls:41 pos. detend Clip/protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Mode switch:Stereo/brigde/parallel Limit switch:On / off (per channel) Output connectors:Neutrik© SPEAKON© 4-pol. NL4 Operation voltage:98 - 252 volts Soft start:Yes Switch mode power supply (SMPS):Yes Sensivity switch:1.4 V / 32 db / 26 db Power factor correction (PFC):Yes Maximum power consumption:3.200 W Dimensions unit (mm) W x H x D:483 x 89 x 449 Dimensions packing (mm) W x H x D:558 x 150 x 580 Weight (net / gross):13 kg / 18 kg

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.000 W at 2 HU) ► Independent clip limiters ► Class-H technology (all models) ► XLR input connectors (with XLR-link connectors) ► SPEAKON© output connectors (Neutrik©) ► Comprehensive package of safety circuits ► Front mounted gain controls for easy access Description The DXP-series amplifiers are two-channel amplifiers at a compact size of 2 HU (rack spaces). The DXP-series amplifiers offer clean, dynamic sound quality and reliability that pros depend on. The front panel shows two gain controls for easy access and the main switch. The LED display informs about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) can be switched in following modes: 1.4 volts, 32 dB and 26 dB. Two SPEAKON© outputs are mounted at the rear side. The SPEAKON© connector of output 1 (left) is connected at all four poles. This connector offers the output signal of channel 2 (right) at the pins 2 (+/-). This enables a four-pole connection of two-way speaker systems with one speaker cable only. The DXP-series amplifiers can be switched into three different operation modes: stereo, parallel and bridge mode. The independent limiters can be switched on or off. All models are equipped with a switch-on delay to protect the connected speakers. Technical data Model:DXP2300 Article number:# 22171 8 ohms per channel (watt):800 4 ohms per channel (watt):1.200 2 ohms per channel (watt):1.500 8 ohms bridged (watt):2.400 4 ohms bridged (watt):3.100 THD at 1 kHz and 1 dB below clipping:0.05 % THD at 100 kHz and 1 dB below clipping:0.07 % THD at 10 kHz and 1 dB below clipping:0.1 % Damping factor:1.000 Channel separation at 10 kHz:54 dB Output impedance:minimum 2 ohms load Slew rate:55 V / µs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:70 dB Gain controls:41 pos. detend Clip/protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Mode switch:Stereo/brigde/parallel Limit switch:On / off (per channel) Output connectors:Neutrik© SPEAKON© 4-pol. NL4 Operation voltage:98 - 252 volts Soft start:Yes Switch mode power supply (SMPS):Yes Sensivity switch:1.4 V / 32 db / 26 db Power factor correction (PFC):Yes Maximum power consumption:3.200 W Dimensions unit (mm) W x H x D:483 x 89 x 449 Dimensions packing (mm) W x H x D:558 x 150 x 580 Weight (net / gross):13 kg / 18 kg

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.00

DXP 6000 profesionāls jaudas pastiprinātājs

2229.00 €
akustika, jauda, pastiprinātāji, DXP series
2229.00 €

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.000 W at 2 HU) ► Independent clip limiters ► Class-H technology (all models) ► XLR input connectors (with XLR-link connectors) ► SPEAKON© output connectors (Neutrik©) ► Comprehensive package of safety circuits ► Front mounted gain controls for easy access Description The DXP-series amplifiers are two-channel amplifiers at a compact size of 2 HU (rack spaces). The DXP-series amplifiers offer clean, dynamic sound quality and reliability that pros depend on. The front panel shows two gain controls for easy access and the main switch. The LED display informs about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) can be switched in following modes: 1.4 volts, 32 dB and 26 dB. Two SPEAKON© outputs are mounted at the rear side. The SPEAKON© connector of output 1 (left) is connected at all four poles. This connector offers the output signal of channel 2 (right) at the pins 2 (+/-). This enables a four-pole connection of two-way speaker systems with one speaker cable only. The DXP-series amplifiers can be switched into three different operation modes: stereo, parallel and bridge mode. The independent limiters can be switched on or off. All models are equipped with a switch-on delay to protect the connected speakers. Technical data Model:DXP6000 Article number:# 22178 8 ohms per channel (watt):1.800 4 ohms per channel (watt):3.300 2 ohms per channel (watt):5.000 8 ohms bridged (watt):6.600 4 ohms bridged (watt):10.000 THD at 1 kHz and 1 dB below clipping:0.1 % THD at 100 kHz and 1 dB below clipping:0.20 % THD at 10 kHz and 1 dB below clipping:0.15 % Damping factor:1.000 Channel separation at 10 kHz:60 dB Output impedance:minimum 2 ohms load Slew rate:55 V / µs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:41 pos. detend Clip/protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Mode switch:Stereo/brigde/parallel Limit switch:On / off (per channel) Output connectors:Neutrik© SPEAKON© 4-pol. NL4 Operation voltage:98 - 252 volts Soft start:Yes Switch mode power supply (SMPS):Yes Sensivity switch:1.4 V / 32 db / 26 db Power factor correction (PFC):Yes Maximum power consumption:5.200 W Dimensions unit (mm) W x H x D:483 x 89 x 449 Dimensions packing (mm) W x H x D:558 x 150 x 580 Weight (net / gross):14 kg / 19 kg

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.000 W at 2 HU) ► Independent clip limiters ► Class-H technology (all models) ► XLR input connectors (with XLR-link connectors) ► SPEAKON© output connectors (Neutrik©) ► Comprehensive package of safety circuits ► Front mounted gain controls for easy access Description The DXP-series amplifiers are two-channel amplifiers at a compact size of 2 HU (rack spaces). The DXP-series amplifiers offer clean, dynamic sound quality and reliability that pros depend on. The front panel shows two gain controls for easy access and the main switch. The LED display informs about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) can be switched in following modes: 1.4 volts, 32 dB and 26 dB. Two SPEAKON© outputs are mounted at the rear side. The SPEAKON© connector of output 1 (left) is connected at all four poles. This connector offers the output signal of channel 2 (right) at the pins 2 (+/-). This enables a four-pole connection of two-way speaker systems with one speaker cable only. The DXP-series amplifiers can be switched into three different operation modes: stereo, parallel and bridge mode. The independent limiters can be switched on or off. All models are equipped with a switch-on delay to protect the connected speakers. Technical data Model:DXP6000 Article number:# 22178 8 ohms per channel (watt):1.800 4 ohms per channel (watt):3.300 2 ohms per channel (watt):5.000 8 ohms bridged (watt):6.600 4 ohms bridged (watt):10.000 THD at 1 kHz and 1 dB below clipping:0.1 % THD at 100 kHz and 1 dB below clipping:0.20 % THD at 10 kHz and 1 dB below clipping:0.15 % Damping factor:1.000 Channel separation at 10 kHz:60 dB Output impedance:minimum 2 ohms load Slew rate:55 V / µs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:41 pos. detend Clip/protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Mode switch:Stereo/brigde/parallel Limit switch:On / off (per channel) Output connectors:Neutrik© SPEAKON© 4-pol. NL4 Operation voltage:98 - 252 volts Soft start:Yes Switch mode power supply (SMPS):Yes Sensivity switch:1.4 V / 32 db / 26 db Power factor correction (PFC):Yes Maximum power consumption:5.200 W Dimensions unit (mm) W x H x D:483 x 89 x 449 Dimensions packing (mm) W x H x D:558 x 150 x 580 Weight (net / gross):14 kg / 19 kg

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.00

DXP 3600 profesionāls jaudas pastiprinātājs

1630.00 €
akustika, jauda, pastiprinātāji, DXP series
1630.00 €

Professional high-performance power amplifiers with SMPS and PFC Features ► Professional audio quality and robust processing ► SMPS (switch mode power supply) with PFC ► Compact design (up to 10.00

XPS 900 profesionāls jaudas pastiprinātājs ar integrētu krossoveri

522.00 €
akustika, jauda, pastiprinātāji, XPS series
522.00 €

Class-D Switch Mode Power Amplifier with Crossover The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS900 (Class-D) 8 ohms per channel (watt):300 4 ohms per channel (watt):450 2 ohms per channel (watt):n/a 8 ohms bridged (watt):900 4 ohms bridged (watt):n/a THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:100 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:46x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.0 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:No Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 335 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):8.5 kg / 10.5 kg

Class-D Switch Mode Power Amplifier with Crossover The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS900 (Class-D) 8 ohms per channel (watt):300 4 ohms per channel (watt):450 2 ohms per channel (watt):n/a 8 ohms bridged (watt):900 4 ohms bridged (watt):n/a THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:100 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:46x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.0 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:No Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 335 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):8.5 kg / 10.5 kg

Class-D Switch Mode Power Amplifier with Crossover The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces).

XPS 2000 profesionāls jaudas pastiprinātājs ar integrētu krossoveri

910.00 €
akustika, jauda, pastiprinātāji, XPS series
910.00 €

Class-DH Switch Mode Power Amplifier with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS2000 (Class-DH) 8 ohms per channel (watt):650 4 ohms per channel (watt):1.000 2 ohms per channel (watt):1.300 8 ohms bridged (watt):2.000 4 ohms bridged (watt):2.300 THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:1.000 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:50x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.4 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:Yes Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 415 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):10.3 kg / 12.3 kg

Class-DH Switch Mode Power Amplifier with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS2000 (Class-DH) 8 ohms per channel (watt):650 4 ohms per channel (watt):1.000 2 ohms per channel (watt):1.300 8 ohms bridged (watt):2.000 4 ohms bridged (watt):2.300 THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:1.000 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:50x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.4 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:Yes Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 415 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):10.3 kg / 12.3 kg

Class-DH Switch Mode Power Amplifier with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces).

XPS 3000 profesionāls jaudas pastiprinātājs ar integrētu krossoveri

1159.00 €
akustika, jauda, pastiprinātāji, XPS series
1159.00 €

Class-DH Switch Mode Power Amplifiers with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS3000 (Class-DH) 8 ohms per channel (watt):900 4 ohms per channel (watt):1.500 2 ohms per channel (watt):1.800 8 ohms bridged (watt):3.000 4 ohms bridged (watt):3.600 THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:1.000 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:63x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.4 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:Yes Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 441 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):12 kg / 14 kg

Class-DH Switch Mode Power Amplifiers with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS3000 (Class-DH) 8 ohms per channel (watt):900 4 ohms per channel (watt):1.500 2 ohms per channel (watt):1.800 8 ohms bridged (watt):3.000 4 ohms bridged (watt):3.600 THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:1.000 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:63x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.4 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:Yes Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 441 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):12 kg / 14 kg

Class-DH Switch Mode Power Amplifiers with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces).

XPS 3600 profesionāls jaudas pastiprinātājs ar integrētu krossoveri

1345.00 €
akustika, jauda, pastiprinātāji, XPS series
1345.00 €

Class-DH Switch Mode Power Amplifier with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS3600 (Class-DH) 8 ohms per channel (watt):1.000 4 ohms per channel (watt):1.800 2 ohms per channel (watt):2.200 8 ohms bridged (watt):3.600 4 ohms bridged (watt):4.400 THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:1.000 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:63x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.4 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:Yes Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 441 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):12 kg / 14 kg

Class-DH Switch Mode Power Amplifier with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces). All models are equipped with a high-efficient SMPS (switch mode power supply), which ensures top performance and light weight. The front panel shows two gain controls for easy access and the main switch. Two round LED displays inform about the condition of the amplifiers. The rear side shows two XLR input connectors and two XLR output connectors (link). The input sensivity (gain) is 32 dB. Two SPEAKON© outputs and four binding posts are mounted at the rear side. The SPEAKON© connector of the output channel 1 (left) is connected with all four poles. This connector offers additionally the output signal of channel 2 (right) at the pins 2 (+/-). This enables an efficient four-pole connection of two-way speaker systems with one speaker cable only. The XPS-series amplifiers can be switched into three different modesof operation: stereo, parallel and bridge mode. The integrated crossover is equipped with a high-pass filter and a low-pass filter (each 18 dB / Butterworth). The filter type can be set and activated by a switch on the rear panel. The function of the crossover is switched off in position FULLRANGE. The XPS models are equipped with a switchable impedance matching function (except XPS 900 = class-D). This power converter can be set by the OVP switch on the rear panel. The OVP function ensures that the amplifiers deliver full output power even at low impedances. All models are equipped with a switch-on delay function to protect the connected speakers. Technical Data Model:XPS3600 (Class-DH) 8 ohms per channel (watt):1.000 4 ohms per channel (watt):1.800 2 ohms per channel (watt):2.200 8 ohms bridged (watt):3.600 4 ohms bridged (watt):4.400 THD at 1 kHz and 1 dB below clipping:0.01 % THD at 100 kHz and 1 dB below clipping:0.01 % THD at 10 kHz and 1 dB below clipping:0.2 % Damping Factor:1.000 Hum and Noise:>90 Channel separation at 10 kHz:60 dB Output impedance:100 ohms Slew rate:19 V / μs Input Impedance:20 k ohms bal. /10 k ohms bal. Common mode rejection:60 dB Gain controls:63x (34 dB) Clip / protect indicators:LEDS Output headroom indicators:LEDS Input connectors:Neutrik© XLR female Link connectors:Neutrik© XLR male Input Sesitivity V rms (8 Ohms):1.4 volts Mode switch:Stereo / brigde / parallel Limiter:Yes Output connectors:Neutrik© SPEAKON© 4-pol. + Binding Posts Operation voltage:180 - 242 volts Soft start:Yes Switch mode power supply (SMPS):Yes OVP Power Converter:Yes Switch Crossover (18dB/Butterworth):120 Hz LPF / HPF/Fullrange Dimensions unit (mm) W x H x D:483 x 89 x 441 Dimensions packing (mm) W x H x D:554 x 123 x 554 Weight (net / gross):12 kg / 14 kg

Class-DH Switch Mode Power Amplifier with Crossover and OVP Power Converter The XPS-series amplifiers are two-channel class-DH amplifiers at a compact size of 2 HU (rack spaces).

Sindikāta saturs