B-52

ACT-18XS Pasīvā zemfrekvences akustiskā sistēma (subwoofer)

669.00 €
ACT-18XS Pasīvā zemfrekvences akustiskā sistēma (subwoofer)
669.00 €

The B-52 ACT-18XS Passive 18" 1000W subwoofer features superior-grade 13-ply Baltic birch construction, 16-gauge perforated steel grille for maximum protection, 2-3/8" diameter steel pole

PA-15X Pasīvā akustiskā sistēma

925.00 €
PA-15X B-52
925.00 €

Пассивная акустическая система PA-15X B-52

650Вт,8 Ом,
15'+2'comp.driver,
40-19000Гц,
SPL 98 дБ, peak SPL 129 дБ
Производитель: B-52 Pro Audio (США)

Модели PA-15X и PA-1515X предназначены для особенно крупных мероприятий, таких как гастрольные концерты, где необходима беспредельная мощь в сочетании с высокой точностью звучания. Эти акустические системы рассчитаны на воспроизведение живого звука и живой музыки с абсолютной достоверностью. Они предлагают высокую мощность, исключительную точность звукопередачи и расширенную отдачу на низких частотах. Обе модели оснащены динамиками с 4-дюймовыми катушками и компрессионными драйверами с 2-дюймовой титановой диафрагмой, которые обеспечивают достоверное и чистое воспроизведение средних и высоких частот с устойчивой проекцией звука.

PA-15X B-52

Passive acoustic system 650w,8 Ohms,
15'+2'comp.driver, 40-19000Hz, SPL 98 dB, peak SPL 129 dB
Manufakturer: B-52 Pro Audio (USA)

The PA-15X provides high acoustic output with smooth mids and accurate highs that are not fatiguing to the ear. The PA-15X is ideally mated with a B-52 Architectural Series subwoofer for a high-power, full-fidelity system. The COMP-3300 2” exit compression driver is coupled to a large format horn for wide dispersion, while the B-52 15-200 4” voice-coiled loudspeaker delivers rock-solid low end. A full-range/bi-amp selector switch is included.

PA-15X features
• Made in the U.S.A.
• High-temperature 4” polyamide voice coils
• Cast-aluminum frames
• 2” exit titanium diaphragm compression drivers
• 13-ply void-free Baltic birch construction
• Black scratch resistant paint finish
• Internal flying hardware (3/8” - 16 TPI)
• Internal bracings and acoustic dampening
• Enhanced-grip B-52 handles
• Pole-mounting cup (PA-15X)
• Dual Neutrik™ NL4 Speakon™ connectors
• Full-range/bi-amp selector switch

PA-15X specifications   
Nominal Impedance:    8 Ohms
Frequency Response:    40-19K Hz
High-Freq. Dispersion:    90° x 40°
X-Over Points:    1.4K Hz
Power Handling:    650 watts
SPL @ 1w1m:    98 dB
Peak SPL:    129 dB
Dimensions (W” x H” x D”):    21 x 31 x 21
Weight (lbs):    94
 

Pasīva akustiska sistēma 650w,8 Omi,

15'+2'comp.driver,
40-19000Hz,
SPL 98 dB, peak SPL 129 dB
Ražotājs: B-52 Pro Audio (ASV)

MX-18S Pasīvā zemfrekvences akustiskā sistēma (subwoofer)

425.00 €
B-52 MX-18S
425.00 €

Пассивный сабвуфер B52 MX-18S

Низкочастотная пассивная акустическая система 550 Вт, 8 Ом,
18', 35-250 Гц, SPL 99 дБ, peak SPL 130 дБ
Производитель: B-52 Pro Audio (США)

B-52 MX-18S со своим глубоким и насыщенным басом поможет любой широкополосной акустической системе серии MX усилить отдачу на нижних частотах вплоть до самой низкой октавы. В нем использован сделанный в США 18-дюймовый сабвуфер на литой раме с 3,5-дюймовой термостойкой полиамидной звуковой катушкой. Монтажный адаптер позволяет вставить металлическую трубу-стойку, которая будет удерживать широкополосную модель MX-15.

Технические характеристики:

    Комплектация: 18"НЧ.
    Мощность: 550 Вт RMS.
    Чувствительность: 99 дБ.
    Частотный диапазон: 30 Гц - 160 Гц.
    Сопротивление: 8 Ом.
    Размеры: 610 x 838 x 558 мм.
    Разъемы: Speakon, 1/4" Jack.
    Вес: 36 кг.
 

B-52 MX-18S

The B-52 MX-18S delivers deep, rich bass and extends the low frequency response of any MX-Series full-range system to its lowest octave. It utilizes a Made in the U.S.A., cast-framed 18” subwoofer with a 3.5” high-temperature, polyamide voice coil. A pole mount adapter provides for easy installation of a metal tube to support the MX-15.

Nominal Impedance:    8 Ohms
Frequency Response:    30-160 Hz
High-Freq. Dispersion:    N/A
X-Over Points:    N/A          
Power Handling:    550 watts
SPL @ 1w1m:    99 dB
Peak SPL:    130 dB
Dimensions (W”x H” x D”):    23 x 26 x 22
Weight (lbs):    90 lbs
 

Pasīva zemfrekvences akustiska sistēma B-52 MX-18S

Jauda: 550 w, 8 Omi,
Skaļrunis  18',
Frekvenču josla 35-250 Hz,
SPL 99 dB, peak SPL 130 dB

LX-18EV2 Pasīvā subwoofer skanda

755.00 €
B52 LX-18EV2
755.00 €

B52 LX-18EV2 COMPACT 18-INCH SUB 1000W @ 8 OHMS

Низкочастотная пассивная акустическая система
1000 Вт, 8 Ом, 18', 30-160 Гц, SPL 106 дБ, peak SPL 136 дБ
Производитель: B-52 Pro Audio (США)

B52 LX-18EV2 COMPACT 18-INCH SUB 1000W @ 8 OHMS

The B-52 LX-18E V2 delivers intense long-throw bass from a powerful andmobile subwoofer. Ideal for mobile DJs, live bands and small to mediumpermanent installations, the LX-18E V2 features the same B-52 18-200Xsubwoofer used in the LX-18 V2 with a cast-aluminum frame, 200 oz magnetstructure, double spider, anti-rocking surround and a 4? tempered voice coil.

The new B-52 18-200X 18? subwoofer features acast-aluminum frame, 200 oz magnet structure, doublespider anti-rocking surround, a bumped back plate forgreater excursion and 4? dual-layered temperedvoice coil. The voice coil is wound with 4 layers of25-gauge copper wire, optimally sized for this motor.

The B-52 18? subwoofer's acoustic load is controlled by a specially designed horn and compression chamber that minimizes the excursion of the driver while maximizing the system's output. The optimally-sized acoustic aperture of the compression chamber forms the throat of the horn and helps to force air through the horn at an increased velocity and pressure. The compression chamber optimizes the horn's output and the acoustic impedance seen by the B-52 18-200L transducer. It is this acoustic impedance transforming ?phase-plug? design that enables the LX-Series subwoofers to achieve amazing and unprecedented output levels.

Specifications:

  • Nominal Impedance: 8 Ohms
  • Frequency Response: 30-160 Hz
  • Power Handling: 1000 watts
  • SPL @ 1w1m: 106
  • Peak SPL: 136
  • Dimensions (W" x H" x D"): 24 x 36 x 25
  • Weight (lbs): 126

LX-18EV2 Pasīvā subwoofer skanda

Pasīva zemfrekvences akustiska sistēma

LX-18AV3 Aktīvā subwoofer skanda B-52

1240.00 €
LX-18AV3 Active subwoofer
1240.00 €

Active subwoofer LX-18AV3

The LX-18AV3 (active) is the third generation of our powerful folded horn subwoofer design, hailed by music professionals for their reliability, performance and affordability. The V3 is bigger, louder and better. V3 improvements include a larger cabinet with an improved horn design and our new overbuilt class H amplifier. At the heart of these folded horn cabinets is the new 18-220X subwoofer which provides higher efficiency and an ultra-efficient heat management system which keeps the speaker cool even when driven at high SPLs.

The LX-18AV3 is powered by our award-winning 1200-watt class H amplifier. The overbuilt design includes a compressor/ limiter, subsonic filter, phase switch, stereo XLR inputs and both full-range and high-pass XLR outputs. The built-in 18dB/octave electronic crossover provides 70Hz, 100Hz and 140Hz settings allowing you to perfectly match your top cabinets to this sub.

LX-18AV3 Amplifier features
• 1200-watt RMS class H amplifier
• 800 watts RMS @ 8 ohms (LX-18AV3)
• 1200 watts RMS @ 4 ohms (LX-18AV3
& LX-18V3 connected)
• Frequency response: 30-140 Hz
• Built-in 18dB/octave electronic crossover
with 70Hz, 100Hz and 140Hz settings
• Subsonic filter: 24dB/octave @ 30 Hz
• Built-in compressor/limiter
• XLR balanced inputs
• XLR balanced FR & HP outputs
• 0-180° phase switch
• Neutriktm speaker output
• Full thermal & short circuit protection

Built-in compression chamber
The 18” subwoofers are housed in a compression chamber that minimizes the excursion of the driver while maximizing the subwoofers’ output. The optimally-sized acoustic aperture of the compression chambers forms the throat of the horn and helps force the air at an increased velocity and pressure. The compression chamber optimizes the horn’s output, allowing for amazing output levels.
 
Efficient aluminum heatsink design
The new aluminum heatsink design dissipates heat in the cabinet’s compression chamber. This provides increased thermal power handling, decreased power compression, increased output and cooler long-term operation.

At the heart of the beast
All B-52 folded-horn cabinets are loaded with the new B-52 18-220X subwoofer which provides high-power handling, great efficiency, very low distortion and accurate sound reproduction. Key features include:
• 4-inch “inside/outside” voice coil wound on both
sides of the glass fiber coil former, providing more
effective cooling through greater air contact
• The light weight and robust cast aluminum frame is
shaped to minimize reflections on the back of the cone
• The entire loudspeaker is designed to work as a “heat
sink” for extreme cooling efficiency
• The advanced magnet topology ensures an even
distribution of magnetic flux throughout the whole
magnet assembly, resulting in symmetrical motor
movement preventing stray flux which can cause
interference
• The glass-fiber impregnated cone incorporates a
sealed surround and added edge-damping to greatly
reduce the occurrence of unwanted cone resonances
• The vented magnet ensures constant air circulation to
drive heat away from the magnet assembly

 

Active subwoofer LX-18AV3

The LX-18AV3 (active) is the third generation of our powerful folded horn subwoofer design, hailed by music professionals for their reliability, performance and affordability. The V3 is bigger, louder and better. V3 improvements include a larger cabinet with an improved horn design and our new overbuilt class H amplifier. At the heart of these folded horn cabinets is the new 18-220X subwoofer which provides higher efficiency and an ultra-efficient heat management system which keeps the speaker cool even when driven at high SPLs.

The LX-18AV3 is powered by our award-winning 1200-watt class H amplifier. The overbuilt design includes a compressor/ limiter, subsonic filter, phase switch, stereo XLR inputs and both full-range and high-pass XLR outputs. The built-in 18dB/octave electronic crossover provides 70Hz, 100Hz and 140Hz settings allowing you to perfectly match your top cabinets to this sub.

LX-18AV3 Amplifier features
• 1200-watt RMS class H amplifier
• 800 watts RMS @ 8 ohms (LX-18AV3)
• 1200 watts RMS @ 4 ohms (LX-18AV3
& LX-18V3 connected)
• Frequency response: 30-140 Hz
• Built-in 18dB/octave electronic crossover
with 70Hz, 100Hz and 140Hz settings
• Subsonic filter: 24dB/octave @ 30 Hz
• Built-in compressor/limiter
• XLR balanced inputs
• XLR balanced FR & HP outputs
• 0-180° phase switch
• Neutriktm speaker output
• Full thermal & short circuit protection

Built-in compression chamber
The 18” subwoofers are housed in a compression chamber that minimizes the excursion of the driver while maximizing the subwoofers’ output. The optimally-sized acoustic aperture of the compression chambers forms the throat of the horn and helps force the air at an increased velocity and pressure. The compression chamber optimizes the horn’s output, allowing for amazing output levels.
 
Efficient aluminum heatsink design
The new aluminum heatsink design dissipates heat in the cabinet’s compression chamber. This provides increased thermal power handling, decreased power compression, increased output and cooler long-term operation.

At the heart of the beast
All B-52 folded-horn cabinets are loaded with the new B-52 18-220X subwoofer which provides high-power handling, great efficiency, very low distortion and accurate sound reproduction. Key features include:
• 4-inch “inside/outside” voice coil wound on both
sides of the glass fiber coil former, providing more
effective cooling through greater air contact
• The light weight and robust cast aluminum frame is
shaped to minimize reflections on the back of the cone
• The entire loudspeaker is designed to work as a “heat
sink” for extreme cooling efficiency
• The advanced magnet topology ensures an even
distribution of magnetic flux throughout the whole
magnet assembly, resulting in symmetrical motor
movement preventing stray flux which can cause
interference
• The glass-fiber impregnated cone incorporates a
sealed surround and added edge-damping to greatly
reduce the occurrence of unwanted cone resonances
• The vented magnet ensures constant air circulation to
drive heat away from the magnet assembly

 

LX-18AV3 Aktīvā subwoofer skanda B-52

Aktīvā subwoofer skanda ar 800 Wattu RMS @ 8 Ohms
18'' collu skaļrunis

ACT-15 X Aktīvā skanda B-52

955.00 €
B-52 ACT-15X Active speaker 600-Watt 15” Two-Way
955.00 €

B-52 ACT-15X - активная 2-х полосная АС прокатного класса,

НЧ-головка - 15", 600 Bт, 130 дБ, 40-19000 Гц, корпус - фанер

Широкополосные акустические системы B-52 серии ACT обеспечивают насыщенное и чистое звучание даже при исключительно высоком уровне звукового давления. В конструкции усилителей ACT используются сложные схемы, включая четырехступенчатую коррекцию, встроенный компрессор, лимитер и защиту от коротких замыканий/перегрузок. Двухполосная модель ACT-15X мощностью 600 Вт с одним 15-дюймовым динамиком прекрасно подходит для самостоятельного использования в качестве широкополосной акустической системы или в комбинации с сабвуфером серии ACT для придания звучанию дополнительной мощи.  ACT-15X обеспечивает впечатляющий уровень звукового давления, сводя при этом до минимума риск выхода из строя усилителя и акустических систем. Встроенная в усилитель четырехступенчатая схема коррекции является прекрасным дополнением для громкоговорителей.

Технические характеристики.
       
Корпус:     13-слойная березовая фанера, ударопрочная эмаль, трапециевидный, ручки, перфорированная стальная защитная решетка 1,5 мм
Акустическое оформление:     фазоинверторное
Направленность:     _
Головки:     НЧ - 15”, ВЧ - 1”
Мощность:     600 Вт при 8 Ом, усилитель класса H с двухступенчатым блоком питания
Чувствительность:     _
Звуковое давление:     130 дБ
Частотный диапазон:     40-19000 Гц
Кроссовер:     _
Прочее:     коэффициент нелинейных искажений усилителя - 0,03%, встроенный компрессор/лимитер, 4-ступенчатая частотная коррекция, соотношение сигнал/шум усилителя - 100 дБ А-взвеш., схема защиты усилителя от перегрева и короткого замыкания, фильтр сверх-низких частот - 24 дБ/окт. при 30 Гц
Разъёмы:     вход и выход - XLR
Управление:     регулировка громкости
Габариты:     500 x 810 x 470 мм
Вес:     43 кг

B-52 ACT-15X Active speaker 600-Watt 15” Two-Way

The ACT-Series full-range systems are capable of producing rich, clear, sound at extreme SPLs. The ACT amplifiers employ sophisticated circuitry including four stages of equalization, a built-in compressor/limiter and short circuit/over-current protection. The ACT-Series has an extra high current output stage, which sets it apart from the competition, allowing for uninterrupted extended play.

Built-in Compressor & Equalizer
The highly sophisticated compression circuitry in the ACT-15(X) & ACT-1515(X) allows for impressive SPLs while minimizing the risk of damage to either the amplifier or loudspeakers. The four-stage equalization network built into the amplifier acts as the perfect complement to the system’s loudspeaker components.

ACT-15X
• Class H amplifier with 2-stage power supply
• 600 watts @ 8 ohms - ACT-15(X)
• Max system SPL: 130dB - ACT-15(X)
• Frequency response: 40-19K Hz - ACT-15(X)
• Amplifier rated THD: 0.03%
• Built-in compressor/limiter
• 4-stage loudspeaker equalization
• Amplifier S/N ratio > 100dB A-weighted
• Amplifier damping factor > 800
• Subsonic Filter: 24 dB/octave @ 30 Hz
• Power requirements: 115V/230V 60/50 HZ
factory configured
• XLR balanced inputs (Pin 2 = +)
• XLR full range output
• Amplifier thermal & short circuit protection
• Signal sensing circuitry with LED indicators
• Oversized convection cooled heatsink
for worry-free operation

Cabinet features
• Made in U.S.A
• 13-ply Baltic birch contruction
• Heavy-duty scratch resistant durable black
paint finish (ACT-15X)
• Steel pole-mount cup (ACT-15X)
• 16-gauge perforated steel grille for
maximum protection
• Aeroports lower distortion and
increase output
• Dimensions (W) x (H) x (D):
ACT-1515(X): 21.25” x 48.5” x 18.5”
ACT-15(X): 19.75” x 32” x 18.5”
• Weight:
ACT-1515(X): 140 lbs
ACT-15(X): 95 lbs

Aktīvā skanda B-52 ACT-15X

Aktīvā skanda ar 600W jaudu uz 8 Ohmiem
15'' Collu skaļrunis

ST-412S Ģitāras kabinets B-52

799.00 €
ST-412S Ģitāras kabinets B-52
799.00 €

The ST-412V and ST-412S are designed to complement the ST-60A and ST-100A all-tube amplifiers. At the foundation of these slant and straight cabs are 12" Celestion Vintage 30 speakers. The 3/4” Baltic birch cabinet construction ensures strength, tone and durability. Classic white piping and black grille cloth match the flame-panel design of the ST heads for a striking on-stage presence. • 70-watt Celestion Vintage 30 speakers • Black grille cloth & white piping • Metal handles, rubber feet and metal • corners • Detachable casters for easy transport • Large grain black vinyl • (matches ST-Series amplifiers) • Dimensions: 30" (w) x 30" (h) x 14" (d) • Weight: 98 lbs Celestion Vintage 30 Power Handling: 70 watts Frequency Response: 70-5K Hz Nominal Impedance: 16 ohms Sensitivity (dB): 100 Voice Coil Diameter: 1 3/4" Weight: 50 oz The ST-412V & ST-412S both include rugged 3" casters for easy transport Sturdy ABS plastic corners provide excellent protection and increased longevity on all ST speaker cabinets. The ST-412V and ST-412S are switchable between Mono (4 or 16 ohms) and Stereo (8 ohms per side). The two Mono impedance options allow better matching to amplifiers while the stereo capability makes it ideal for rack systems, which are often run in stereo.

The ST-412V and ST-412S are designed to complement the ST-60A and ST-100A all-tube amplifiers. At the foundation of these slant and straight cabs are 12" Celestion Vintage 30 speakers. The 3/4” Baltic birch cabinet construction ensures strength, tone and durability. Classic white piping and black grille cloth match the flame-panel design of the ST heads for a striking on-stage presence. • 70-watt Celestion Vintage 30 speakers • Black grille cloth & white piping • Metal handles, rubber feet and metal • corners • Detachable casters for easy transport • Large grain black vinyl • (matches ST-Series amplifiers) • Dimensions: 30" (w) x 30" (h) x 14" (d) • Weight: 98 lbs Celestion Vintage 30 Power Handling: 70 watts Frequency Response: 70-5K Hz Nominal Impedance: 16 ohms Sensitivity (dB): 100 Voice Coil Diameter: 1 3/4" Weight: 50 oz The ST-412V & ST-412S both include rugged 3" casters for easy transport Sturdy ABS plastic corners provide excellent protection and increased longevity on all ST speaker cabinets. The ST-412V and ST-412S are switchable between Mono (4 or 16 ohms) and Stereo (8 ohms per side). The two Mono impedance options allow better matching to amplifiers while the stereo capability makes it ideal for rack systems, which are often run in stereo.

The ST-412V and ST-412S are designed to complement the ST-60A and ST-100A all-tube amplifiers. At the foundation of these slant and straight cabs are 12" Celestion Vintage 30 speakers.

ST-412V Ģitāras kabinets B-52

799.00 €
B-52 ST-412V
799.00 €

The ST-412V and ST-412S are designed to complement the ST-60A and ST-100A all-tube amplifiers. At the foundation of these slant and straight cabs are 12" Celestion Vintage 30 speakers. The 3/4” Baltic birch cabinet construction ensures strength, tone and durability. Classic white piping and black grille cloth match the flame-panel design of the ST heads for a striking on-stage presence. • 70-watt Celestion Vintage 30 speakers • Black grille cloth & white piping • Metal handles, rubber feet and metal • corners • Detachable casters for easy transport • Large grain black vinyl • (matches ST-Series amplifiers) • Dimensions: 30" (w) x 30" (h) x 14" (d) • Weight: 98 lbs Celestion Vintage 30 Power Handling: 70 watts Frequency Response: 70-5K Hz Nominal Impedance: 16 ohms Sensitivity (dB): 100 Voice Coil Diameter: 1 3/4" Weight: 50 oz The ST-412V & ST-412S both include rugged 3" casters for easy transport Sturdy ABS plastic corners provide excellent protection and increased longevity on all ST speaker cabinets. The ST-412V and ST-412S are switchable between Mono (4 or 16 ohms) and Stereo (8 ohms per side). The two Mono impedance options allow better matching to amplifiers while the stereo capability makes it ideal for rack systems, which are often run in stereo.

The ST-412V and ST-412S are designed to complement the ST-60A and ST-100A all-tube amplifiers. At the foundation of these slant and straight cabs are 12" Celestion Vintage 30 speakers. The 3/4” Baltic birch cabinet construction ensures strength, tone and durability. Classic white piping and black grille cloth match the flame-panel design of the ST heads for a striking on-stage presence. • 70-watt Celestion Vintage 30 speakers • Black grille cloth & white piping • Metal handles, rubber feet and metal • corners • Detachable casters for easy transport • Large grain black vinyl • (matches ST-Series amplifiers) • Dimensions: 30" (w) x 30" (h) x 14" (d) • Weight: 98 lbs Celestion Vintage 30 Power Handling: 70 watts Frequency Response: 70-5K Hz Nominal Impedance: 16 ohms Sensitivity (dB): 100 Voice Coil Diameter: 1 3/4" Weight: 50 oz The ST-412V & ST-412S both include rugged 3" casters for easy transport Sturdy ABS plastic corners provide excellent protection and increased longevity on all ST speaker cabinets. The ST-412V and ST-412S are switchable between Mono (4 or 16 ohms) and Stereo (8 ohms per side). The two Mono impedance options allow better matching to amplifiers while the stereo capability makes it ideal for rack systems, which are often run in stereo.

The ST-412V and ST-412S are designed to complement the ST-60A and ST-100A all-tube amplifiers. At the foundation of these slant and straight cabs are 12" Celestion Vintage 30 speakers.

LG-7512 ģitāras pastiprinātājs B-52

370.00 €
B-52 LG-7512
370.00 €

B-52 LG7512 гитарный комбо 75 Вт/8 Ом, 110 Вт/4 Ом, 12", два канала, ревер, педаль, выход на наушники, линейный выход и выход на доп.кабинет.

Полупроводниковый 12-дюймовый комбо LG-7512 обеспечивает мощный звук, от искрящегося, чистого до жестких искажений. В модели используется новейшая технология имитации лампы в полупроводниковом усилении, что в результате приводит к получению чистых искаженных каналов, дающих ощущение лампового усиления. В комплекте также имеются прочный ножной переключатель и съемные колеса.

75-Watt 12" Combo
75w RMS - 8 ohms stereo
110w RMS - 4 ohms stereo
размеры: 635(Д) X 482(Ш) Х 279(Г)
вес: 23,1 кг

LG-7512:
    
75-watt RMS solid-state 1 x 12" combo

75 watts RMS @ 8 ohms
110 watts RMS @ 4 Ohms

The LG-7512 features Overdrive and Clean channels with modern tone. Independent level controls for bass, treble, mids and gain are provided on each channel, and it has a master volume and reverb. The Overdrive Channel offers a Gain 1 and Gain 2 with a contour control. It includes a rugged footswitch and detachable casters. The footswitch controls channel select, reverb, and the gain select.

LG-7512 features and specifications

• Custom built, heavy-duty B-52 12” speakers
• Overdrive Channel: Gain 1, Gain 2 with contour,
• 3-band EQ and level control
• Clean Channel: 3-band EQ and level control
• Master volume and spring reverb
• Effects send and return with level controls
• Footswitch for channel select,
• reverb on/off, gain select
• Pushswitch for channel select, gain select
• Dimensions: 25" x 19 " x 11"
• Weight: 51lbs

LG-7512:
    
75-watt RMS solid-state 1 x 12" combo
75 watts RMS @ 8 ohms
110 watts RMS @ 4 Ohms

Sindikāta saturs